Last Updated on 2025-02-21 by Anzeige
Leather punching, as a key process in leather processing, not only affects the aesthetics of leather products, but also directly affects the comfort and durability of products. In order to meet the punching needs of different leather products, it is essential to provide a set of efficient and accurate perforating solutions. This article will introduce the solutions and steps of leather punching in detail to help leather processing companies improve production efficiency and optimize product quality.
1.Preparation perforating solutions before perforating
1.1 Determine the punching needs
Clearly define the specific requirements such as punching pattern, hole type, hole diameter and hole spacing.
According to the leather material, thickness and intended use, select the appropriate punching tools and parameters.
1.2 Prepare leather materials
Check whether the leather surface is flat and flawless to ensure the punching effect.
Perform necessary pretreatment on the leather, such as decontamination, degreasing, humidification, etc., to improve the punching quality.
1.3 Select punching equipment
Choose different types of punching equipment such as manual Stanzmaschine, pneumatic punching machine, laser punching machine, etc. according to the punching needs.
Ensure that the equipment is in good condition and perform necessary debugging and calibration.
2. Punching operation steps
2.1 Install the punching die
Select the appropriate punching die according to the punching pattern and install it on the punching equipment.
Adjust the die position to ensure the punching positions is accurate.
2.2 Set the punching parameters
Adjust the pressure, speed and other parameters of the punching equipment according to the leather material and thickness.
Perform a trial punch, observe the punching effect, and make fine adjustments if necessary.
2.3 Start the punching operation
Place the leather material on the workbench of the punching equipment and fix the position.
Start the punching equipment and perform the punching operation. Pay attention to keep the punching speed uniform to avoid too fast or too slow resulting in a decrease in punching quality.
2.4 Check the punching quality
After the punching is completed, carefully check whether the punching position, hole diameter, hole spacing, etc. meet the requirements.
Trim the punching edge, remove burrs and debris, and ensure that the leather surface is flat and smooth.
3. Post-punching treatment
3.1 Clean the leather surface
Use a clean soft cloth or brush to remove punching debris and stains on the leather surface.
If necessary, use a professional cleaner to clean and keep the leather surface clean.
3.2 Maintain the punching equipment
Clean and lubricate the punching equipment to ensure that the equipment is in good condition.
Check whether all parts of the equipment are intact. If damaged, replace or repair them in time.
3.3 Storing leather materials
Sort and store the punched leather materials as required to avoid moisture, deformation or damage.
Make good marks and records for subsequent processing and use.
Precautions
During the punching process, ensure the safety of the operator, wear protective equipment, and avoid accidental injuries.
Punching equipment should be maintained and maintained regularly to ensure its normal operation and extend its service life.
For leather of different materials and thicknesses, choose appropriate punching parameters and molds to obtain the best punching effect.
Through the implementation of the above steps and precautions, the quality and efficiency of leather punching can be efficient. More perforating solutions please contact May +86 180 0298 0031
If you want to watch video of leather punching machine,please visit our YOUTUBE CHANEL https://www.youtube.com/@Anze-Perforation-machine
Einige Modelle werden bereits werksseitig montiert geliefert. Großgeräte werden in mehreren Teilen verpackt und mit einer Montageanleitung geliefert. Alle Geräte sind mit Bedienungsanleitungen in chinesischer und englischer Sprache ausgestattet.
Kunden können Mitarbeiter zur Schulung in das Anze-Werk entsenden, oder wir entsenden technische Experten für eine Schulung vor Ort.
Die Maschine sollte auf einem stabilen Tisch befestigt werden, und die Umgebung sollte sauber und ordentlich gehalten werden, um den Kontakt mit Staub, statischer Elektrizität, Feuchtigkeit und Spänen zu vermeiden, die zu Teileausfällen führen könnten.
Wir verfügen über ein erfahrenes Kundendienstteam, einen 24-Stunden-Online-Service und ein umfassendes Kundendienstsystem. Wir bieten Werkschulungen, technische Video-Tutorials und Unterstützung für die Wartung von Maschinen im Ausland. Zudem stehen Ihnen unsere Ingenieure zur Verfügung.
Selbstverständlich freuen wir uns über Ihren Besuch in unserem Unternehmen und bieten Ihnen die Möglichkeit zu einem persönlichen Gespräch, um die gegenseitigen Geschäftsbeziehungen zu fördern.
Die Lieferzeit variiert je nach Bestellmenge und individuellen Anpassungen und beträgt in der Regel 7 bis 10 Werktage. Bei Sonderanfertigungen von Lederstanzmaschinen beträgt die Lieferzeit 1 bis 2 Monate.
English
Portuguese
Italian
Vietnamese
Russian
French
Arabic
Spanish
German
Japanese
Korean
