Last Updated on 2025-02-21 by 안제
Leather punching, as a key process in leather processing, not only affects the aesthetics of leather products, but also directly affects the comfort and durability of products. In order to meet the punching needs of different leather products, it is essential to provide a set of efficient and accurate perforating solutions. This article will introduce the solutions and steps of leather punching in detail to help leather processing companies improve production efficiency and optimize product quality.
1.Preparation perforating solutions before perforating
1.1 Determine the punching needs
Clearly define the specific requirements such as punching pattern, hole type, hole diameter and hole spacing.
According to the leather material, thickness and intended use, select the appropriate punching tools and parameters.
1.2 Prepare leather materials
Check whether the leather surface is flat and flawless to ensure the punching effect.
Perform necessary pretreatment on the leather, such as decontamination, degreasing, humidification, etc., to improve the punching quality.
1.3 Select punching equipment
Choose different types of punching equipment such as manual punching machine, pneumatic punching machine, laser punching machine, etc. according to the punching needs.
Ensure that the equipment is in good condition and perform necessary debugging and calibration.
2. Punching operation steps
2.1 Install the punching die
Select the appropriate punching die according to the punching pattern and install it on the punching equipment.
Adjust the die position to ensure the punching positions is accurate.
2.2 Set the punching parameters
Adjust the pressure, speed and other parameters of the punching equipment according to the leather material and thickness.
Perform a trial punch, observe the punching effect, and make fine adjustments if necessary.
2.3 Start the punching operation
Place the leather material on the workbench of the punching equipment and fix the position.
Start the punching equipment and perform the punching operation. Pay attention to keep the punching speed uniform to avoid too fast or too slow resulting in a decrease in punching quality.
2.4 Check the punching quality
After the punching is completed, carefully check whether the punching position, hole diameter, hole spacing, etc. meet the requirements.
Trim the punching edge, remove burrs and debris, and ensure that the leather surface is flat and smooth.
3. Post-punching treatment
3.1 Clean the leather surface
Use a clean soft cloth or brush to remove punching debris and stains on the leather surface.
If necessary, use a professional cleaner to clean and keep the leather surface clean.
3.2 Maintain the punching equipment
Clean and lubricate the punching equipment to ensure that the equipment is in good condition.
Check whether all parts of the equipment are intact. If damaged, replace or repair them in time.
3.3 Storing leather materials
Sort and store the punched leather materials as required to avoid moisture, deformation or damage.
Make good marks and records for subsequent processing and use.
Precautions
During the punching process, ensure the safety of the operator, wear protective equipment, and avoid accidental injuries.
Punching equipment should be maintained and maintained regularly to ensure its normal operation and extend its service life.
For leather of different materials and thicknesses, choose appropriate punching parameters and molds to obtain the best punching effect.
Through the implementation of the above steps and precautions, the quality and efficiency of leather punching can be efficient. More perforating solutions please contact May +86 180 0298 0031
If you want to watch video of leather punching machine,please visit our YOUTUBE CHANEL https://www.youtube.com/@Anze-Perforation-machine
일부 모델은 공장에서 조립된 상태로 출고됩니다. 대형 장비는 여러 부품으로 나누어 포장되며 설치 설명서가 함께 제공됩니다. 모든 장비에는 중국어 및 영어로 된 사용자 설명서가 포함되어 있습니다.
고객이 Anze 공장으로 인원을 보내 교육을 받게 하거나, 당사가 기술 전문가를 파견하여 현장 교육을 제공할 수 있습니다.
기계는 안정적인 테이블 위에 고정해야 하며, 먼지, 정전기, 습기 및 칩과의 접촉으로 인한 부품 고장을 방지하기 위해 주변 환경을 깨끗하고 정돈되게 유지해야 합니다.
당사는 24시간 온라인 서비스를 제공하는 경험 많은 애프터서비스 팀과 완벽한 애프터서비스 시스템을 갖추고 있습니다. 공장 교육 지원, 해외 기계 서비스 지원을 위한 비디오 기술 지원, 온라인 지원, 엔지니어 지원 등을 제공합니다.
물론 저희 회사를 방문하셔서 직접 만나 뵙고 상호 사업 발전을 도모하시는 것을 환영합니다.
제작 기간은 주문 수량 및 맞춤 제작 여부에 따라 다르며, 일반적으로 7~10 영업일이 소요됩니다. 가죽 펀칭기 맞춤 제작 주문의 경우 1~2개월이 소요됩니다.
English
Portuguese
Italian
Vietnamese
Russian
French
Arabic
Spanish
German
Japanese
Korean
