Last Updated on 2025-02-21 by アンゼ
Leather punching, as a key process in leather processing, not only affects the aesthetics of leather products, but also directly affects the comfort and durability of products. In order to meet the punching needs of different leather products, it is essential to provide a set of efficient and accurate perforating solutions. This article will introduce the solutions and steps of leather punching in detail to help leather processing companies improve production efficiency and optimize product quality.
1.Preparation perforating solutions before perforating
1.1 Determine the punching needs
Clearly define the specific requirements such as punching pattern, hole type, hole diameter and hole spacing.
According to the leather material, thickness and intended use, select the appropriate punching tools and parameters.
1.2 Prepare leather materials
Check whether the leather surface is flat and flawless to ensure the punching effect.
Perform necessary pretreatment on the leather, such as decontamination, degreasing, humidification, etc., to improve the punching quality.
1.3 Select punching equipment
Choose different types of punching equipment such as manual punching machine, pneumatic punching machine, laser punching machine, etc. according to the punching needs.
Ensure that the equipment is in good condition and perform necessary debugging and calibration.
2. Punching operation steps
2.1 Install the punching die
Select the appropriate punching die according to the punching pattern and install it on the punching equipment.
Adjust the die position to ensure the punching positions is accurate.
2.2 Set the punching parameters
Adjust the pressure, speed and other parameters of the punching equipment according to the leather material and thickness.
Perform a trial punch, observe the punching effect, and make fine adjustments if necessary.
2.3 Start the punching operation
Place the leather material on the workbench of the punching equipment and fix the position.
Start the punching equipment and perform the punching operation. Pay attention to keep the punching speed uniform to avoid too fast or too slow resulting in a decrease in punching quality.
2.4 Check the punching quality
After the punching is completed, carefully check whether the punching position, hole diameter, hole spacing, etc. meet the requirements.
Trim the punching edge, remove burrs and debris, and ensure that the leather surface is flat and smooth.
3. Post-punching treatment
3.1 Clean the leather surface
Use a clean soft cloth or brush to remove punching debris and stains on the leather surface.
If necessary, use a professional cleaner to clean and keep the leather surface clean.
3.2 Maintain the punching equipment
Clean and lubricate the punching equipment to ensure that the equipment is in good condition.
Check whether all parts of the equipment are intact. If damaged, replace or repair them in time.
3.3 Storing leather materials
Sort and store the punched leather materials as required to avoid moisture, deformation or damage.
Make good marks and records for subsequent processing and use.
Precautions
During the punching process, ensure the safety of the operator, wear protective equipment, and avoid accidental injuries.
Punching equipment should be maintained and maintained regularly to ensure its normal operation and extend its service life.
For leather of different materials and thicknesses, choose appropriate punching parameters and molds to obtain the best punching effect.
Through the implementation of the above steps and precautions, the quality and efficiency of leather punching can be efficient. More perforating solutions please contact May +86 180 0298 0031
If you want to watch video of leather punching machine,please visit our YOUTUBE CHANEL https://www.youtube.com/@Anze-Perforation-machine
一部のモデルは工場で組み立てられた状態で出荷されます。大型機器は複数の部品に分けて梱包され、設置マニュアルが付属します。すべての機器には、中国語と英語の取扱説明書が同梱されています。
お客様がAnze（アンゼ）の工場へ担当者を派遣して研修を受けていただくことも、当社が技術専門家を派遣して現地で研修を行うことも可能です。
安定したテーブルに設置し、ほこり、静電気、湿気、切りくずとの接触を避けるために、環境を清潔に整頓してください。これにより、部品の故障を防ぐことができます。.
経験豊富なアフターサービスチームが24時間オンラインで対応し、万全のアフターサービス体制を整えています。工場でのトレーニングサポート、海外での機械サービスに対応できるビデオ技術サポート、オンラインサポート、エンジニアが対応いたします。.
もちろんでございます。弊社の訪問を歓迎いたします。対面でのコミュニケーションを通じて、相互のビジネスを推進しましょう。.
リードタイムは、注文数量とカスタマイズによって異なり、通常7〜10営業日です。カスタムレザーパンチングマシンのご注文の場合は、1〜2ヶ月かかります。.
English
Portuguese
Italian
Vietnamese
Russian
French
Arabic
Spanish
German
Japanese
Korean
