Dernière mise à jour le 2025-02-21 par Anze
As an indispensable equipment in the leather processing industry, the machine à perforer le cuir has a high efficiency and precision punching capacity, which greatly improves the production efficiency and aesthetics of leather products. However, in order to give full play to the performance of the leather punching machine, the correct use method and operation skills are essential. This article will introduce in detail how to prepare, operate and maintain the leather punching machine to help users complete the leather punching operation efficiently and safely.
1. Preparation for leather perforation machine
1.1 Check the equipment
Before use, the machine à poinçonner le cuir should be fully inspected to ensure that all parts are intact, fasteners are not loose, and the power cord is firmly connected.
Check whether the punching die matches the required hole type. If necessary, replace the appropriate die in advance.
1.2 Prepare materials
Prepare the leather material to be punched according to production requirements. Ensure that the leather surface is flat and wrinkle-free to obtain a uniform punching effect.
Prepare necessary auxiliary tools, such as clamps, gauges, etc., for use during operation.
2. Leather perforation machine Operation steps
2.1 Install the die
Install the selected punching die to the designated position of the leather punching machine. During installation, make sure that the mold is firmly installed to avoid loosening or falling off during the punching process.
2.2 Adjust parameters
According to the material and thickness of the leather, adjust the punching force and punching depth of the leather punching machine. Generally speaking, thicker leather requires greater punching force and deeper punching depth.
To set the punching position, you can use the machine’s own control system for precise positioning, or use a clamp to fix the leather in a specified position.
2.3 Start punching
Démarrer le machine à poinçonner le cuir, and let the punch fall to punch the leather according to the preset program or manual operation.
During the punching process, pay close attention to the operating status of the machine to ensure that the punching effect meets expectations. If any abnormality is found, stop the machine immediately for inspection and troubleshooting.
2.4 Check quality
After punching is completed, check the quality of the leather products to ensure that the punching position is accurate, the hole shape is consistent, and there are no defects such as burrs.
If quality problems are found, the punching parameters should be adjusted or the mold should be replaced in time to improve the punching effect.
3. Maintenance and care of leather perforation machine
3.1 Daily cleaning
After each use, the machine à perforer le cuir should be cleaned to remove residual leather debris and oil stains.
Use a clean soft cloth to wipe the surface and internal parts of the machine, and avoid using corrosive detergents.
3.2 Regular inspection
Check the various parts of the leather punching machine regularly to ensure that the fasteners are not loose and the transmission parts are operating normally.
Check the wear of the mold and replace it with a new mold in time if necessary.
3.3 Lubrication and maintenance
According to the requirements of the machine manual, regularly add an appropriate amount of lubricating oil or grease to the transmission parts and sliding parts of the leather punching machine.
Pay attention to check the cleanliness and appropriateness of the lubricating oil or grease to avoid problems caused by too much or too little.
4. Safety precautions
When using the leather punching machine, personal protective equipment such as safety helmets, protective glasses and gloves should be worn.
Strictly abide by the operating procedures and safety regulations, and it is prohibited to adjust the mold or perform other dangerous operations when the machine is running.
In case of emergency or machine failure, the machine should be stopped immediately and the power supply should be cut off for inspection and processing.
Anze provide training, the correct use and maintenance of leather punching machines is essential to improving production efficiency and product quality. I hope that the introduction in this article can provide useful reference and help for the majority of leather processing companies and practitioners.
Si vous souhaitez regarder la vidéo de la machine à poinçonner le cuir, veuillez visiter notre site Web. YOUTUBE CHANEL https://www.youtube.com/@Anze-Perforation-machine
Certains modèles sont livrés assemblés en usine. Les grands équipements sont emballés en plusieurs parties et un manuel d'installation est fourni. Tous les équipements sont équipés de manuels d'utilisation en chinois et en anglais.
Les clients peuvent envoyer quelqu'un à l'usine d'Anze pour apprendre ou nous envoyons des experts techniques pour fournir une formation sur place.
La machine doit être fixée sur une table stable et l'environnement doit être maintenu propre et ordonné afin d'éviter tout contact avec la poussière, l'électricité statique, l'humidité et les copeaux susceptibles de provoquer une défaillance des pièces.
Nous disposons d'une équipe après-vente expérimentée, d'un service en ligne 24h/24 et d'un système après-vente complet. Nous disposons d'un support de formation en usine, d'un support technique vidéo pour l'entretien des machines à l'étranger, d'un support en ligne et d'ingénieurs.
Bien entendu, nous vous invitons à visiter notre entreprise et à établir une communication directe afin de faire progresser les affaires mutuelles.
Le délai de livraison varie en fonction de la quantité commandée et de la personnalisation, et se situe généralement entre 7 et 10 jours ouvrables.
English
Portuguese
Italian
Vietnamese
Russian
French
Spanish
Arabic
